Chapter 4 Service Configuration
Command Mode
Global configuration mode
Syntax
set qos priority-mapping qos-profile default
Guidelines
This command will clear all profile configurations. Use caution.
The untag message allocates UP fields in accordance with the configuration of default-up.
In general, select the corresponding profile to process the message in accordance with
trust-mode.
1.
If trust-mode is configured as port-profile mode, select a profile in accordance with
port-to-profile.
2.
If trust-mode is configured as user-priority, select a profile in accordance with
up-to-profile.
3.
If trust-mode is configured as dscp-priority mode, the device will judge the remapping
configuration first. If the configuration is disabled, use the dscp-to-profile configuration
to select a profile. If the configuration is enabled, use the dscp-to-dscp configuration to
map dscp fields. After mapping, the dscp value is used to implement the dscp-to-profile
operation.
Example
The following example recovers the default configuration of QoS profiles:
zte(cfg)#set qos priority-mapping qos-profile default
zte(cfg)#show qos priority-mapping qos-profile 100
QoS Mapping Profile Table:
Flags: QosIndex - Priority Mapping Profile
TrafficClass - Local Traffic Class, DropPri - Local Drop Priority
DSCPNew - New User Priority Value If Remark DSCP Priority Enable
UsrPriNew - New User Priority Value If Remark User Priority Enable
QosIndex
TrafficClass
DropPri
DSCPNew
UsrPriNew
-------------------------------------------------------------------------------
Profile-100
COS-0
GREEN
0
UP-0
4.14.9 set qos queue-schedule enhance
Purpose
This command sets the optimized queue scheduling mode.
4-307
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
