Chapter 4 Service Configuration
4.3 POE Configuration
4.3.1 set poe port enable/disable
Purpose
This command enables or disables the POE function for ports.
Command Mode
Global configuration mode
Syntax
set poe port
<
portlist
>{
enable
|
disable
}
Parameter Description
Parameter
Description
<
portlist
>
Port list.
enable
Enables the POE function.
disable
Disables the POE function.
Guidelines
If the POE function is enabled, power supply is provided for ports in accordance with port
priorities (including critical, high, and low). If port priorities are the same, power supply
is provided from the port with the smallest port number to the port with the largest port
number. If the POE function is disabled, power is removed from the port with the smallest
port number to the port with the largest port number.
Default
The POE function is disabled.
Example
The following example enables the POE function for ports 1, 3, and 5:
zte(cfg)#set poe port 1/1,1/3,1/5 enable
4.3.2 set poe port pd-max-power
Purpose
This command sets the maximum power of ports.
4-63
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
