Zte ZXR10 5250 Series Command Reference Manual Download Page 497

Page: 497 / 708

Chapter 4 Service Configuration

Syntax

set dhcp option82 mode port

1-28

default

drop

modify

append

}

Parameter Description

Parameter

Description

1-28

Port number. Different devices have different port number ranges.

In the syntax, the 5250-28TC device is used as an example.

default

Default mode. In this mode, option82 in a packet is not modified.

drop

Drop mode. In this mode, a packet with option82 is discarded.

modify

Modify mode. In this mode, option82 in a packet is modified in

accordance with the local option82.

append

Append mode. In this mode, the local option82 is appended into a

packet.

Guidelines

When an DHCP packet with option82 is received, the packet is directly forwarded to the

server in case of the default mode, or discarded in case of the drop mode, or modified in

accordance with the local option82 and then forwarded to the server in case of the modify

mode, or appended with the local option82 and then forwarded to the server in case of the

append mode.

4.25.12 clear dhcp snp-bind-entry mac

Purpose

This command clears snooping binding entries.

Command Mode

Global configuration mode

Syntax

clear dhcp snp-bind-entry

{

mac

HH.HH.HH.HH.HH.HH

port

1-28

all

}

Parameters

Parameter

Description

HH.HH.HH.HH.HH.HH

Deletes snooping binding entries by MAC address.

port

1-28

Deletes all snooping binding entries of the specified port.

all

Deletes all snooping binding entries.

4-439

SJ-20131111172707-003|2013-11-27 (R1.0)

ZTE Proprietary and Confidential

Summary of Contents for ZXR10 5250 Series





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZXR10 5250 Series

Reviews:

Related manuals for ZXR10 5250 Series

Brands by name

Popular brands

Zte ZXR10 5250 Series, Command Reference Manual

Search results

Summary of Contents for ZXR10 5250 Series

Reviews:

Related manuals for ZXR10 5250 Series

Brands by name

Popular brands