ZXR10 5250 Series Command Reference
Syntax
tftp
<
A.B.C.D
>
upload
<
local-file-name
>[<
remote-file-name
>]
tftp
<
A.B.C.D
>
download
<
remote-file-name
>[<
local-file-name
>]
Parameter Description
Parameter
Description
<
A.B.C.D
>
Server IP address.
download
Downloads a file from the server to the local Flash memory.
upload
Uploads a local file to the server.
<
local-file-name
>
Name of the file in the local Flash memory. The parameter can be
in any of the following formats:
1.
If the parameter includes the absolute path, such as
/cfg/startrun.dat
(device format), the full path name of
the file is
/cfg/startrun.dat
.
2.
If the parameter includes the relative path, such as
cfg/startrun.dat
, the full path name of the file is
/cfg/startrun.dat
(assuming the current path of the local
Flash memory is "/").
3.
If the parameter does not include any path, such
as
startrun.dat
, the full path name of the file is
/cfg/startrun.dat
(assuming the current path of the local
Flash memory is
/cfg/
).
<
remote-file-name
>
Name of the file on the server. The parameter can be in any of the
following formats:
1.
If the parameter includes a path, such as
\cfg\startru
n.dat
(windows format), the full path name of the file is
D:\svn_5250\prj\cfg\startrun.dat
(assuming the
path of the TFTP server is
D:\svn_5250\prj\
).
2.
If the parameter does not include any path, such
as
startrun.dat
, the full path name of the file is
D:\svn_5250\prj\startrun.dat
(assuming the path of
the TFTP server is
D:\svn_5250\prj\
).
Guidelines
l
If the <
local-file-name
> and <
remote-file-name
> parameters are the same, the <
remote-
file-name
> parameter can be omitted.
l
The Trivial File Transfer Protocol (
) command requires the configuration ofthe
layer-3 interface of the switch. For layer-3 interface configuration, refer to the
IPv4
Layer-3 Configuration
and
IPv6 Layer-3 Configuration
sections in this manual.
3-6
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential