Chapter
Error! Style not defined.
Error! Style not de
fined.
11-3
11.4 Installing the Parts
11.4.1 Preparing the GPS Coaxial Cable Connectors
1. Stripping
The size of the GPS coaxial cable to be stripped is as shown in Fig. 11.4-1.
6.2
16.7
Fig. 11.4-1 Stripping the GPS Coaxial Cable
2. Welding the core wire
Before welding the core wire, thread the parts with the cable in the sequence as
shown in Fig. 11.4-2. Then weld the cable core wire and the pins. Note that the
cable shielding layer should be open and slipped on the bushing.
Pin
Insulating piece
Cable shielding
Bushing
Pressing tube
Nut
Cable
Cable co re
Tin solder
Fig. 11.4-2 Welding the Pins of the GPS Connector
3. Parts for Installation
After welding the core wire, put the parts in the sheath. The structure of the
cable assembly is as shown in Fig. 11.4-3.
