Chapter 6 Installing the Grounding System
describes the installation procedure of
the BTSB grounding system.
Chapter 7 Installing the Cabinet Internal Cables
introduces the types of BTSB
cabinet internal cables, and describes the installation procedure of them.
Chapter 8 Installing the Trunk Cables
describes the installation procedure of the
BTSB trunk cables, and explains how to prepare the E1 cables and how to convert the
75
Ω
trunk cables into the 120
Ω
trunk cables.
Chapter 9 Installing the Monitoring System
introduces the composition of the
monitoring system and describes its installation procedure.
Chapter 10 Installing the Main Antenna Feeder System
describes the installation
preparation, the installation flow and the specific installation procedure of the main
antenna feeder system, and explains how to check and test the antenna feeder and how
to conduct waterproof treatment on the connector.
Chapter 11 Installing the GPS Antenna Feeder System
describes the installation
preparation, the installation flow and the specific installation procedure of the GPS
antenna feeder system.
Chapter 12 Installing the Board
describes the types and functions of boards used in
the BTSB system, and how to install and replace them.
Chapter 13 Hardware Installation Check
describes the hardware installation check
requirements of the BTSB system.
Chapter 14 Power-on/Power-off
describes the check prior to the BTSB power-on, and
the detailed power-on and power-off operation procedures.
Appendix A
gives an abbreviation form.
Conventions
Describing notational conventions, keyboard operation convention, mouse operation
convention and four safety signs.
1. Notational
conventions
Angular brackets "<and>" identify names of keys and buttons, and the
information typed by an operator from a terminal. Square brackets "[and]"
indicate a man-machine interface, menu item, data list, or field name. The
