ZXC10-BTS (V5.4) Installation Manual
7-6
3. The wiring of the front panel is further described in Table 7.2-1.
Table 7.2-1 Front Panel Wiring of the Rack for the Single-carrier Single-sector BTS
No.
Cable Name and
Code
Length (mm)
End A Direction
End B Direction
RFE RF cables
1
RFE/01-250 (220)
250 (220)
BTS-RFE-RFE1-ANT
BTS - set top
2
RFE/02-220
220
BTS-RFE-RFE2-ANT
BTS - set top
RF03 RF cables
3 RF03/01-530 530
BTS-RFE-RFE1-TEST
BTS-HPA-BTM-RFE1
4 RF03/02-460 460
BTS-RFE-RFE2-TEST
BTS-HPA-BTM-RFE2
RF01 RF cables
5 RF01/07-1050 1050
BTS-RFE-RFE1-RX1
BTS-TRX-TRX1-RX1
6 RF01/08-1200 1200
BTS-RFE-RFE2-RX1
BTS-TRX-TRX1-RX2
RF06 RF cables
7 RF06/01-260 260
BTS-RFE-RFE1-HPA
BTS-HPA-HPA1-RF-OUT
8 RF06/04-800 800
BTS-HPA-HPA1-RF-IN
BTS-TRX-TRX1-TX
MS
test
antenna
9
MS-860
860
BTS-HPA-BTM-ANT
BTS - set top
Grounding cables of the door
10
JDX
250
Grounding screw of the
BTS grounding shelf
Grounding screw of the
front door
7.2.2 Installing the RF Cables for a Single-carrier Two-sector BTS
1. Connecting the RF cables
Fig. 7.2-3 shows the circuitry on the front panel of the rack for the single-carrier
two-sector BTS.