R800
HANDBOOK
72
Figure 5-7-13 Network Tool Tab
Step 3 Input the test IP address or domain name in
“
Address
”
, then click
“
Ping
”
to test the connection between Router
and network, the table below is for the parameter description:
Table 5-7-5 Network Tool Parameter
Parameter Name
Meaning
How to Configure
Address
IP address or domain name
Input IP address or domain name
Ping
Use Ping command to test the connection
Click
“
Ping
”
Trace
Use Trace command to test the hops from router to target
address
Click
“
Trace
”
result
Test result
。
NA
Trace: Namely traceroute, whereby we can know the path for the information to be transferred from your
computer to the host on the other end of the Internet and test the time needed for small packets to be sent to the
destination device until they return. Every device on the path will be tested for 3 times in terms of Traceroute. The
output results include each testing time (ms), the name of the device (if any) and its IP address.
5.7.10. T
EMPERATURE
A
LARM
Temperature Alarm
Configure the temperature value to send a alarm, should be connected to LED indicator alarm.
Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in
“
5.2.1 Log onto the WEB Configuration
Interface
”
.
Step 2: Click
“
System Management >Temperature Alarm
”
to open the
“
Temperature Alarm
”
tab, as shown in Figure below:
