R800
HANDBOOK
67
Figure 5-7-8 Network Testing Tab
Step 3: Input the IP address or domain name for testing in the "Detect Address" box, click "Ping" to test the connectivity of the
router to the destination address. See Table 5-7-2 for the local log parameters.
Table 5-7-2 Local Log Parameters
Parameter Name
Meaning
How to Configure
Detect Address
To set the destination IP address or domain name for testing.
Fill in the IP address or domain name for testing.
Ping
To test the network connectivity with Ping.
Click "Ping".
Trace
To test the number of hops needed by the router to reach the
destination address with Trace.
Click this button to use Trace.
Detection Results
Network testing results.
No.
Trace: Namely traceroute, whereby we can know the path for the information to be transferred from your
computer to the host on the other end of the Internet and test the time needed for small packets to be sent to the
destination device until they return. Every device on the path will be tested for 3 times in terms of Traceroute. The
output results include each testing time (ms), the name of the device (if any) and its IP address.
5.7.5. S
YSTEM
T
IME
System Time
Set the system time of R800, default configuration is network synchronization, also can set it manually.
Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in
“
5.2.1 Log onto the WEB Configuration
Interface
”
.
Step 2: Click
“
System Management >System Time
”
to open the
“
System Time
”
tab, as shown in Figure below:
