R800
HANDBOOK
77
Table 5-8-5 Client Mode State Parameters
Parameter Name
Meaning
How to Configure
Mode
Client mode
Unmatchable
SSID
AP identifier for the router connection
Unmatchable
Device
Tunnel
Working tunnel for the router connection
Unmatchable
Network Speed
Signal
Network Mode
Network mode for the router to connect AP
Unmatchable
SSID
Network Type
Address
IP address assigned by the AP to the router for the router
connection
Unmatchable
Default Gateway
Default gateway assigned by the AP to the router for the
router connection
Unmatchable
5.8.6. M
OBILE
N
ETWORK
S
TATE
You can learn about the
“
Mobile Network State
”
and "Mobile Network Device Information" by querying the Mobile Network
State to determine whether the network and the device are normal to analyze abnormal situations and solve the relevant problems.
Step 1 Log onto the WEB configuration interface of R800 LTE Router as provided in "5.2.1 Log onto the WEB Configuration
Interface".
Step 2 Click
“
State > Mobile Network State
”
.
Open the
“
Mobile Network State
”
tab, as shown in Figure 5-8-6. See Table 5-8-6 for the parameters.
Figure 5-8-6 Mobile Network State Page
Table 5-8-6 Mobile Network State Page Parameters
Parameter Name
Meaning
How to Configure
Network Type
To register the wireless network type
Unmatchable
Module
To identify the wireless module
Unmatchable
SIM Card State
Working state of the SIM for the card slot used by R800 LTE Router.
Unmatchable
Mobile Signal
Signal intensity of the wireless network. Value range: 1
～
31
If there is no signal, dial-up cannot be successful.
Unmatchable
