R800
HANDBOOK
53
translation.
TCP+UDP
TCP
UDP
External Area
It generally refers to the external area of the
device, namely the Wan address, including port
address and VPN tunnel address.
WAN, generally referring to the external address of the device
External Port
Port used by the destination address in the IP
packet
Range: 1~65535. Specify a single port or use '-' to determine the
range.
Internal Area
It generally refers to the LAN address of the device,
generally the LAN port
Select LAN
Internal IP
Original destination address as the address upon
replacement
A.B.C.D interface pattern or A.B.C.D/M
Internal Port
Original port as the port upon replacement
Range: 1~65535. Specify a single port or use '-' to determine the
range.
5.5.3. R
OUTE
C
ONFIGURATION
Static routing provides a specific forwarding path for the router to forward packets and must be manually configured by the
user. Static routing includes static routing and policy-based routing in terms of its form. Static routing is selected based on the
destination address while policy-based routing is selected based on the source address (the router detects the source address of the
received forward packets and, based on the source address, forward with the corresponding routing). And policy-based routing has
priorities ranging from 3
～
252, where a smaller number indicates a higher priority. There is also a priority between static routing and
policy-based routing: policy-based routing has a higher priority than static routing.
Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in
“
5.2.1 Log onto the WEB Configuration
Interface
”
. Click
“
Forwarding Settings > Route Configuration
”
, as shown in Figure 5-5-3.
Figure 5-5-3 Routing Tab
Click
“
Create
”
to create a static routing rule, as shown in Figure 5-5-4
