Zte -J G730 User Manual Download

Page: 58 / 64

ZTE-J G730/G740/G750/G780 GoTa Digital Mobile Phone User Manual

Settings

Profiles

, you could set different sounds for different occasions.

Change Profile

1. Using # Key

i Hold

the

# Key

until the profile changes to your desired mode

in standby mode;

ii Release

the

# Key

to activate the desired profile.

2. Using Menu

i In standby mode, select

Menu > Profiles

;

ii Press

the

Up/Down Key

to select the mode you want to

activate;

iii Select

Option > Activate

to activate.

View / Edit Profile

1. In standby mode, select

Menu > Profiles

;

2. Press the

Up/Down Key

to select the mode you want to view;

3. Select

Option > View

;

4. Press the

Up/Down Key

and select

to select the option you

want to edit:

Ringtone/vib:

press the

Left/Right Key

to select ringing mode

and ring tone, and select

Save

to save the settings;

SMS Alert:

press the

Left/Right Key

to select alert mode and

alert tone, and select

Save

to save the settings;

PTT Voice:

press the

Left/Right Key

to select PTT voice from

Speaker

Earpiece

, and set alert set and vibrate set as

Off

, and select

Save

to save the settings;

Summary of Contents for -J G730

































































Search results

Summary of Contents for -J G730

Reviews:

Related manuals for -J G730

Brands by name

Popular brands

Zte -J G730, User Manual

Search results

Summary of Contents for -J G730

Reviews:

Related manuals for -J G730

Brands by name

Popular brands