Zte -J G730 User Manual Download

Page: 51 / 64

ZTE-J G730/G740/G750/G780 GoTa Digital Mobile Phone User Manual

Notes:

Move to UIM (Phn) is available only for the phones

supporting UIM card.

Receive New Message

Your phone will alert upon receipt of a new message in standby
mode. Select

View

to get into

Inbox

to view the new message. If

there are unread messages in the inbox, the icon of unread messages
will display in the status bar of the standby screen.

Outbox

If the

Auto Save

is set as

Yes

, you could view all sent messages

in the

Outbox

1. In standby mode, select

Menu > SMS > Outbox

;

2. Press the

Up/Down Key

to select the message you want to view,

and select

View

to view it;

3. During viewing, press the

Up/Down Key

to view the whole

message; press the

Left/Right Key

to view the next or previous

message;

4. Select

Option > Forward

to forward the message (see

Send

for details);

5. Select

Option > Delete

, and select

Yes

to delete the message;

6. Select

Option > Save Number

to save the receiver’s number

and the numbers in message (see

Phone Book

for details).

Drafts

In the

Drafts

, you could view the messages which are not sent.

You could send it again after editing.
1. In standby mode, select

Menu > SMS > Drafts

;

2. Press the

Up/Down Key

to select the message you want to

view, and select

Option > View

to edit it;

3. After editing, select

Option > Send to

to send it (see

Send

for

details);

Summary of Contents for -J G730

































































Search results

Summary of Contents for -J G730

Reviews:

Related manuals for -J G730

Brands by name

Popular brands

Zte -J G730, User Manual

Search results

Summary of Contents for -J G730

Reviews:

Related manuals for -J G730

Brands by name

Popular brands