Zontes ZT125-M 2022, Maintenance Manual

Page: 205 / 218

205
/
218
1. Instrument panel 2. Front right pedal pad pressure plate 3. Front right pedal pad 4. Rear right pedal pad 5. Rear right pedal
pad presser 6. Fuel Tank Outer Cover 7. Fuel tank cover middle part 8. Front left pedal pad pressure plate 9. Front left pedal
rubber pad 10. Rear left pedal rubber pad 11. Rear left pedal pad presser
Disassembly and assembly of vehicle panel
Caution:
●During disassembly, please pay attention to the force to prevent breaking the buckle.
●When removing the panels, please remove them in strict order. Do not forcibly remove the panels to prevent irreparable
damage to the corresponding panels.
●When unplu gging the plug, please control the force and disassembly method. Do not forcibly unplug the plug to prevent
damage to the plug, resulting in poor contact of harness connector and affecting the function of various parts.
●When installing the harness plug, please check whether the harness thimble in the harness male connector is deformed or
misaligned, so as to prevent the harness thimble in the harness male connector from being damaged during the installation of
the harness plug, thereby affecting the function of each part.
Windshield removal
a. Remove the 4 decorative buckles on the windshield.
b. Use 4# inner hexagon to loosen the 4 M6×16 bolts on
the left and right decorative covers of the windshield.
c. Take out the left and right decorative covers of the
windshield, the windshield, and the rubber pads of the
windshield bracket in turn.
Removal of the front sun visor
a. Use 4# inner hexagon to remove the 2 swell nails on the
front sun visor.