Zontes ZT125-M 2022, Maintenance Manual

Page: 116 / 218

116
/
218
3.Fuse box
Caution:
●If the fuse is blown, you must replace the fuse of the same specification. It is forbidden to use wires such as copper or ir on wire
for direct connection.
●If it is bl own after replacement, you need to troubleshoot the entire vehicle cable before replacing it.
●This vehicle uses a small fuse. The width is about 11mm (0.43in), the length is about 17mm (0.67in), and the thickness is ab out
4mm(0.16in).
●Use the buzzer file of the multimeter to connect the exposed metal part of the fuse to judge whether it has been blown, or use
a tool to unplug and observe.
Refer to the previous steps to remove the battery cover and then pull up the fuse box. After opening the fuse box cover,
check whether the fuse is normal.
No. Name Function Specification
① Main insurance Protect all circuits 25A
② ECM Protect ECM, ECM relay, oil pump relay and other electrical devices 15A
③ Regular power supply Protect fans, meters, and anti-theft device connectors 15A
④ Hydraulic control unit motor Protect ABS hydraulic control unit motor 25A
⑤ Reserve - 25A
⑥ Reserve - 15A
⑦ Hydraulic control unit ECU Protect the hydraulic control unit 10A
⑧ Light Protect the headlight 10A
⑨ Reserve - 15A
⑩ Reserve - 10A
No. Name function Specification
① start up Protection starting circuit 10A
② ABS Protect the ABS controller 10A
③ Assistant Protect position lights, turn signals, tail lights, brake lights, license
plate lights, horns, overtaking lights and other lamps
10A
④ Others
Protect the deputy handle switch, Speedometer, windshield, anti-
theft device connector
10A
The fuse box of M310 folding rear compartment is shown in the figure below. There are two 10A spare fuses on the outside
of the fuse box.
The M310 integrated rear compartment fuse box is shown below: