Zontes ZT125-M 2022, Maintenance Manual

Page: 146 / 218

146
/
218
Starting system electrical schematic diagram
Starter motor
Caution:
●If the starter motor is removed for maintenance, replace
the O-ring with a new one and apply a proper amount of
engine oil.
●Our company only sells starter motor assemblies, not O -
rings and motor parts separately. The O-ring has an inner
diameter of φ25mm (0.98in) and a wire diameter of 3mm
(0.12in).
●The M125 /350 steps are similar to the M310, taking the
M310 as an example.
1. Remove the starter motor
a. Refer to the steps of removing the rear storage box to
remove the rear storage box. For the removal steps, refer
to the stepping motor removal and cleaning carbon
deposits in the section of the throttle valve body in the
"Maintenance" chapter.
b. M310 cut off the two grade 0 flame-retardant cable
ties as shown in the figure.
M125 loosen the rubber buckle and the wire clamp.
c. Loosen the clamp bolt shown in the figure with a 4#
inner hexagon counterclockwise, and pull the air filter