Zontes ZT125-M 2022, Maintenance Manual

Page: 65 / 218

65 / 218
f. Pull out the two relay wires.
There are a total of 8 relays, the model is: KH-1A4T.
g. Unplug the two wires of the starting relay. Open the red
and black protective caps of the starting relay, and remove
the nuts with a 10# sleeve.
h. Straighten out the cables in the battery compartment.
For the medels before March 7,2022, remove the M6×16
bolts (3) on both sides with 4# inner hexagon according to
Figure 1, and remove the bushing ⑷ and cushion rubber ⑸ .
For the medels after March 7,2022,remove 2 pcs swell
nails ⑵ on both sides.
Remove the M6×16 bolts(3) on both sides with a 4# inner
hexagon.
i. According to this step for folding rear storage box, and
the monolithic rear storage box skip directly to the next step.
Use your fingers or a plastic crowbar to pry the glove box
rubber strip ⑺ from one end and remove it. Remove the
decorative buckle ⑻ of the M6 hexagon socket bolt; remove
the M6×16 bolts ⑶ on both sides with 4# hex socket, remove
the bushing ⑷ and the cushion rubber ⑸ . Remove the 3
M4×16 bolts ⑼ with a Phillips screwdriver.
j. Remove the decorative buckle
⑻
of the M6 hexagon
socket bolt; remove the M6×16 bolts ⑶ on both sides with
4# hex socket.
k. Grasp the tail skirt of the storage box and pull it upward
obliquely, paying attention to the cables in the battery
compartment. Pull up to see the left side of the glove box