ZSC-1000 User Manual.doc
Issue 18
Page 32 of 46
M
E
Y
E
R
T
E
C
H
L
I
M
I
T
E
D
Z
S
C
-1
0
0
0
Block global telemetry
Enable this option to prevent the use of global (all cameras) telemetry commands
Default = Off
Prioritise local keyboards
Enabling this option will override the control priority of a remote site if it requests control of a local camera in
use by a local keyboard. The local operator will always be granted control over the remote operator.
Default = Off
Time and Date
The ZSC-1000 can be used to synchronise the time and date across a system.
Broadcast enable
Defines which ports a time / date signal is broadcast on.
Default = ZVM, ZVK and Intersite
Internal TDG
The ZSC-1000 has it’s own time source which can be used to synchronise the system. If this box is ticked, a
time signal is broadcast on the hour, based on the current time held in the unit
Default = Off
Clock - Port
This defines the source that the unit will accept a time/date signal on. Any of the ports can be set as the
source
Default = Zvk
Clock - Clock
This defines the protocol of the time/date signal. This can be one of ZoneVu, Wharton, None or Wharton-old
Default = ZoneVu
Notes
If
Port
is set to PC1 or PC2, selecting one of the Wharton formats under
Clock
automatically selects the
correct protocol on that port.
Wharton-old is only supported on PC1 port.
