ZSC-1000 User Manual.doc
Issue 18
Page 27 of 46
M
E
Y
E
R
T
E
C
H
L
I
M
I
T
E
D
Z
S
C
-1
0
0
0
Camera Mapping
Camera mapping allows remote cameras to be accessed without having to use a site number. This is
particularly useful in older systems where the operator keyboards may not support the selection of sites.
It can also be used to assign a different matrix input number and / or telemetry address to the camera
number selected by the operator.
See the Camera Mapping description in the Features section of the manual for a more detailed explanation.
Index sets the position of each mapping in the list, starting at 0 up to 255 (or 19 for ZSC-1000 & ZSC-500).
The order of mappings is not relevant, however if gaps are left in the list the ‘First Camera’ should be non-
zero if further mappings follow.
Map Video
When enabled, all switches for cameras in the range are re-mapped.
Select this if the matrix input does not match the camera number selected by the operator.
Default = disabled
Map Telemetry
When enabled, all camera control requests and telemetry control for cameras in the range are re-mapped.
Select this if the receiver’s telemetry address does not match the camera number selected by the operator.
Default = disabled
First camera
The first local camera number to be used to reference the mapped cameras.
This marks the start of the camera range presented to the operator.
Default = 0
Last camera
The last local camera number to be used to reference the mapped cameras.
This marks the end of the camera range presented to the operator.
Default = 0
First Remote camera
The first camera number in the mapped range. This marks the start of the range of actual matrix inputs
and/or telemetry receivers addresses used.
Default = 1
