© 2016 ZOLL Data Systems, Inc. All rights reserved.
86
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
7.
After clicking “OK, the dialog box will close and
within a few seconds in the log section in the lower
portion of the viewer will display a notification
advising that the VID was successfully updated with
value entered.
There are a total of 25 VID’s that can be configured to trigger
the Digital Ally DVM-250/250+ cameras. Which VID’s are
configured to do so is at the discretion of the agency.
However,
for each of the VID’s that are to be setup as
triggers, the process described above must be
completed for each
. The list below details each of the
VID’s that used to send the 12VDC pulse using Road Safety’s
Digital OUTPUT 2.
VID
Type
397
RPM
235
Spotter
229
Seatbelt
011
Overspeed (Emergent)
017
Extreme Overspeed (Emergent)
030
Overspeed (Non-Emergent)
024
Extreme Overspeed (Non-Emergent)
050
Coordinated Turn
043
Coordinated Turn
071
Turn Factor One
064
Turn Factor One
092
Turn Factor Two
085
Turn Factor Two
VID
Type
113
Centripetal Acceleration
106
Centripetal Acceleration
134
Longitudinal Forward Go Acceleration
127
Longitudinal Forward Go Acceleration
155
Longitudinal Forward Stop Acceleration
148
Longitudinal Forward Stop Acceleration
176
Longitudinal Reverse Go Acceleration
169
Longitudinal Reverse Go Acceleration
197
Longitudinal Reverse Stop Acceleration
190
Longitudinal Reverse Stop Acceleration
218
Two-Dimensional Acceleration
211
Two-Dimensional Acceleration
IMPORTANT:
Once VID’s are set using the steps above, they MUST be saved to the RS-4000 prior to exiting the
Diagnostics viewer. To save, simply press the fourth button from the left on the button bar.
Not saving prior to exiting will require the re-entry of all values.
