© 2016 ZOLL Data Systems, Inc. All rights reserved.
71
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
9. ROAD SAFETY CONFIGURATIONS SCREEN - DEVICES
This is where you will assign a Road Safety device to a specific vehicle and define some configuration settings
specific to that vehicle. Select the vehicle you are working on to open the EDIT DEVICE screen.
1.
Click on the “Device serial number” drop down field
(1)
in the DEVICE SERIAL NUMBER window and
select the serial number that is being installed in the vehicle. *This must match the serial number on the
RS-4000.
2.
In the RPM Connector Type” field
(2)
specify either “Vehicle Computer” or “High Speed Digital” based
upon how the information is being sent to the device.
3.
If available, complete the Odometer and Engine Time Initialization fields
(3)
.
4.
In the “Device Orientation” field
(4)
enter the orientation of the device installed in the vehicle based
upon the something found in Appendix A.
5.
Click SAVE at the bottom of the page when complete.
Once all Devices have been properly configured, click to return to the Customize Road
Safety screen. Configure Inputs next.
