© 2016 ZOLL Data Systems, Inc. All rights reserved.
45
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
APPENDIX A: PRINTABLE COMPONENT LOCATIONS DIAGRAM
RS-4000 On-Board Computer
:
Records and stores vehicle event information. It is the main control unit for
inputs, outputs, and communication.
Preferred Mounting Location: Equipment cabinet or bulkhead to help reduce tampering and other damage.
Acceptable Mounting Location: Under passenger seat. This area is more susceptible to damage by tampering
and environmental hazards.
NOTE:
Location should be within 16 feet of the driver’s side dashboard. There is an OEM limit of 16
feet for the OBDII/CAN Harness.
RS-4902 - Spotter Switches:
When pressed, a tone alerts the driver that it is safe to back up the vehicle.
Typical Mounting Location: One switch mounted on the rear overhead panel with a clear sight line out the rear
window, and one switch mounted outside the vehicle near the left or right taillight assembly depending on
agency policy.
NOTE:
Place all switches in similar positions on all fleet vehicles to assist the crew.
Typical wire harness routing is through the center overhead or outboard exterior light voids.
Connects to: RS-4001 On-Board Computer via
Digital I/O harness
.
