© 2016 ZOLL Data Systems, Inc. All rights reserved.
5
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
DIGITAL OUTPUTS:
2 optically isolated digital (switched vehicle voltage) outputs available that use a 0 VDC common.
Maximum Current: 1 Amp
AUDIO:
2 audio connections are incorporated. The output is used to give the driver audible warnings. The input
(microphone) is not currently used, but may be incorporated in future enhancements.
1x Audio Out
1x Audio In
MISCELLANEOUS:
Operating Power (Ignition On): ............................ 8-18 VDC @ 25 Watts Maximum
Standby Power (Ignition Off): ............................... 8-18 VDC @ 0.18 Watts Maximum
Maximum Input Voltage: ...................................... 18 VDC
Dimensions: .......................................................... 9.652 x 8.068 x 2.815 in., 204.95 x 245.17 x 71.5mm
Mass: .................................................................... 4.56 lbs., 2.07 Kg
Operating Temperature: ...................................... 14 to 176°F, -10 to 80°C
Storage Temperature: .......................................... -40 to 196°F, -40 to 90°C
Shock Operating: .................................................. 30g Peak Acceleration, 11(±1ms) Pulse Width
Shock Not Operating: ........................................... 30g Peak Acceleration, 11(±1ms) Pulse Width
Vibration: .............................................................. Tested 5g @ 1-500Hz per IEC 68-2-6
RS-4000 & DIGITAL ALLY INTEGRATION
The Digital Ally video recording system (DVM-250/250+) is an in-vehicle audio/video recording system that can be
tightly integrated with the Road Safety system. Tying the two systems together will provide Road Safety the ability
to trigger recordings based upon the violations it detects.
If possible, the installation of the DVM-250/250+ camera(s) should be done simultaneously with the RS-4000
installations. Running cables and making connections for both devices is obviously easier and more efficient if
preformed at the same time rather than bringing the vehicles in for service twice for similar work.
The
Digital Ally system is an optional add-on to the Road Safety system
. If it is being installed in conjunction with
the Road Safety, please see Appendix E for additional information on its setup and configuration.
NOTE:
A detailed set of installation/integration instructions can be found in
of this document.
