© 2016 ZOLL Data Systems, Inc. All rights reserved.
3
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
RS-4000 OVERVIEW
The ZOLL 4000 is an on-board driver modification and data acquisition system that
monitors and reports vehicle speed, vehicle RPM, 16 additional user definable digital
single ended inputs and 6 differential inputs. There are 2 digital outputs. The digital
outputs may be programmed to turn on vehicle components or other devices when a
user defined parameter has been met or the on-board computer receives a user
generated command from ZOLL Online.
The on-board computer internal memory configuration includes 32 GB data memory
and 1 Gb RAM, 2 USB 2.0 ports, 2 Ethernet and 1 RS232 data port, as well as 1 802.11
b/g/n Wi-Fi capability.
The system identifies and databases activities by vehicle. Optional driver
identification allows the system to also record and store activities by driver. The
system administrator may set parameters to activate an audible alarm if the vehicle is operated without a valid
driver identification logged onto the system.
EMBEDDED COMPUTER
SYSTEM:
Intel® Atom™ CPU n455 1.66 MHz
32 Bit Bus.
Windows Embedded Standard Operating System.
1.0 Gb RAM Memory
32 Gb SATA Hard Drive
COMMUNICATIONS:
2x USB 2.0 Ports
2x RJ45, Gigabit Ethernet Ports
1x DB9 (Male), RS-232
VIDEO:
1x HD15 (Female), VGA
WI-FI:
802.11 b/g/n
150 Mb/s
USER INTERFACE
2 Line x 16 Characters Lighted LCD Display.
Membrane Switch Pad with Up, Down, Left, Right and Enter Arrows.
CONTROLLER AREA NETWORK BUSES (CAN)
Two CAN (OBD-II, J-1939) busses are available. One CAN bus is used for communications with the vehicles OBDII
system. The other is a proprietary ZOLL CAN bus.
