Calculating the available UPS power:
x
1 rating plate
- Control systempower consumption
- Electromechanical brakes power consumption
- Other consumers (car light,
…
) power consumption
=
Available UPS_power [W]
Information
Entering the UPS power determines the type of UPS evacuation.
Suf
fi
cient power:
An evacuation trip with the characteristics of an evacuation with optimum UPS
power is implemented.
Not enough power:
An evacuation trip with the characteristics of an evacuation with minimal UPS
power is implemented.
CAUTION!
Caution!
Setting the value for P_UPS too high can lead to an overloading or destruction of the UPS.
(7) Copying the parameters
In the menu
Parameter set 2/COPY
, select the function
PARA->2
. After copying, the parameter is
once again OFF.
Parameter set 2
|
-
"
COPY
Off
|
-
"
PARA1
R
2
Copy parameter
Information
The power failure detection and type of evacuation must be parameterised before copying the
parameters. Only a lower speed of the motor is possible because of the lower mains supply. The
maximum possible speeds for V_2 and V_3 are calculated during the copying process.
(8) Switch off times in which the motor is kept at speed 0:
Con
fi
gure in the
Start/T_3 = 0
menu
Start-up
|
-
"
T_3
0.0
s
|
-
"
0.0
Maintain speed=0
Con
fi
gure in the
Stop/T_4 = 0
menu
Start-up
|
-
"
T_4
0.0
s
|
-
"
0.0
Maintain speed 0
Translation of the original operating instructions
ZETADYN 4C
Emergency evacuation
R-TBA12_01-GB 1415
Part.-No. 00163371-GB
124/204