SECTION ЗА - KEYBOARD PAGING
EXAMPLE
This example illustrates the Operator's display screen from Logon through
two pages and Disconnect. Not shown are "M" typed after "ID=", the four
character Security code, and the CRs that enter all typed data.
I D =
Security code?
-- User Paging Mode --
Users 0 - 99 , (CR for none)
User 45
Alpha Message: This User is programmed to receive alphanumeric
messages!
* Message Accepted *
Users 0 - 99 , (CR for none)
User 9
Numeric Message: 27182818
* Message Accepted *
Users 0 - 99 , (CR for none)
User
* bye *
FULL CAPCODE PAGING
The Full Capcode Paging Mode permits an operator to signal any pager
whether or not it is entered in the User Database. This mode is valuable
for paging testing and installation.
Enter "C" and CR at the "ID=" prompt. If the Security is Enabled, enter the
four character code and CR when prompted for it.
-- Full Capcode Paging Mode --
Format
FORMAT
The initial prompt asks for the number of one the eight Paging Formats
programmed into the Terminal. The number entered here determines which of
the following prompts will be given. The entry should be a number from 0 to
7 followed by CR.
The Operator may leave this mode by typing CR without entering a number.
The Terminal will say goodbye and return to Idle State.
CAPCODE
The Capcode prompt requires the full pager address (see "Section 8 -
Reference" for clues to find this number) followed by CR. It is not
necessary to type any leading zeros.
3A-3
