Zetor MAJOR HS, Operator'S Manual

Page: 137 / 140

Hydraulics control panel 36
Hydrostatic steering 22
Hydrostatic steering failure warning signalization 60
CH
Change of front wheels track with front drive axle 85
Change the direction of drive 52
Change the direction of drive - using the clutch pedal 53
Change the direction of drive by means of reversing lever 52
Checking oil levels in engine 109
Checking the oil in gear box, final drive housing and rear
axle
117
I
If engine does not start 48
Immediately after start 48
Important notification 60
In first 10 hours of operation 61
Independent PTO shaft revolutions 133
Information Display - Fault Notifications 43
Inspection of fouling of coolers 23
Instrument panel 41
Instrument panel - buttons 42
Instrument panel - instruments 42
Instrument panel - signal lamps 41
Internal hydraulic circuit control elements 72
Internal lighting 28
L
Leaving the tractor 60
Lifting force of the three-point hitch 131
Lights adjustment in cab roof check 99
Lights adjustment in tractor´s grill 98
Lights adjustment in tractor´s grill check 98
Limiting draw bars 80
Liquid brakes 23
Liquid for the cooling system of the tractors 106
List of lamps 99
Location of serial numbers 9
Lower draw bar with slipping out end pieces 82
M
Main technical parameters 127
Main tractor's parameters (mm) 127
Maintenance and treatment of tires 122
Maintenance instructions 109
Maintenance of the oil cooler of the front PTO 122
Making front wheels stable 90
Manipulation with starter 48
Manual fuel control lever 34
Maximum permitted vertical static suspensions load for
trailers and semitrailers
64
Maximum transmitted output 70
Means of internal hydraulic circuit regulation 71
Minimum fuel amount in the fuel tank 39
Mixed regulation of three-point linkage heave 74
Monthly performed actions 102
Motor oils 104
Multistage adjustable suspension 63
O
Oil for the front driving axle 105
Oil replacement in gear system 118
Oil to gear systems of tractors 104
One-hose and two-hose brakes 57
One-hose brakes 57
Opening doors from the inside 25
Opening doors from the outside 25
Other recommended service fillings tested on Zetor tractors 104
P
Panel of switches on cab´s roof 30
Parking brake adjustment 125
Passenger´s seat 29
Pedals 35
Performance on rear PTO shaft 131
Permitted maximum load of front axle (kg) 128
Permitted maximum load of rear axle (kg) 128
Permitted maximum weight of set 't mounted
machine' (kg)
128
Placement of fuses in fuse box 96
Plastic lubricant for the tractor 106
Position regulation of rear three-point linkage heave 73
Pouring oil to engine 110
Power regulation of three-point linkage heave 73
Preventive daily maintenance 14
Preventive daily maintenance 21
Preventive daily maintenance 21
Principles for operating tractors equipped with front end
loader
19
Proper clothing 11
Proper function of the heating and air-condition system 33
Protection of cab against aerosols 16
PTO shaft covers 65
PTO shaft drive engagement lever 37
PTO shaft revolutions 540 and 1000 rpm shifting lever 37
PTO shaft revolutions 540 and 1000 rpm shifting lever 66
Q
Quick-couplers engagement and disengagement 76
R
Raw Fuel Filter Clearing 111
Rear three-point linkage 79
Rear view mirrors 28
Rear wheel track change 88
Rear window 26
Reassembly of the air cleaner elements 114
Recovery of the mainair cleaner element 113
Replacement of the filter of the hydraulics suction 117
Replacement of the transmission oil cleaner element with
hydraulic pump suction filter
118
Replacing fillings and filters 103
Replacing full-continuous motor oil filter 110
Replacing the hoses of hydrostatic steering 114
Replacing the safety element of the air cleaner 113
Reversing lever 35
Reversing lever position signalization 49
Road and reduced speeds shifting lever 36
Running in the tractor 61
S
Safety cab 25
Safety instructions for lubrication of the tractor 106
Safety labels 20
Safety principles when working with a three-point linkage 79
Selecting driving direction - Reversing lever 49
Selection of holes in bracket 82
Selection of road or reduced speeds 50
Service inspections 101
Setting of date and time 45
Setting wheel stops with front drive axle 86
Shelf 28
Short functional test 24
Side window 26
Specification of oil for the front driving axle 104
Specification of oil for tractor transmission devices 104
Speed of three-point linkage lowering control 72
Starting the engine 47
Starting the engine 12
Steps performed daily before the start of work 101
Steps performed every 50 hours of work 101
Steps taken after every 100 hours of operation 101
Steps taken after every 500 hours of operation 101
Steps taken beyond 500 Mth interval 102
Stopping the engine 59
Stopping the tractor - manual brake 59
Stretching the V-Belt in the Air-Conditioner Compressor 123
Stretching the V-Belt in the Compressor 123
Sun screen 27
Switch box 33
Switch box key in the position (0) 34
Switch box key in the position (I) 34
Switch box key in the position (II) 34
Switch of front work lights 30
Switch of rear work lights 30
Switch of the marker and main lights 31
Switches and controls on the dashboard 31
Switching of the rear PTO shaft 37
INDEX
136