Checking the oil in gear box, final drive housing and rear axle
Checking should be performed when the engine is not running. The oil level must be within the
range of the dipstick (A).
Replacement of the filter of the hydraulics suction
There is common oil filling of the transmission system.
The oil level is checked with a dipstick (a) located in the
rear part of the tractor on the hydraulics box. The dipstick
hole is used for filling.
MHS16N045
The suction cleaner is located on the left side of the tractor
behind the fuel tank. Replacement of the filter must be
performed when the gearbox filling is drained.
Prior to the replacement of the filter element put
a suitable vessel for catching the dripping oil under
the tractor.
1. Unscrew the sleeve (1) and water tapes (2)
2. Disassemble the filter element
3. Perform assembly of a new filter element
MHS16N042
MAINTENANCE INSTRUCTIONS
117
Summary of Contents for MAJOR HS
