Zetor MAJOR HS, Operator'S Manual

Page: 108 / 140

Tractor greasing plan
Safety instructions for lubrication of the tractor
z
The tractor maintenance may be performed only by the trained personnel thoroughly familiarized with
operational and safety principles.
z
During maintenance of the tractor wear appropriate (specified) personal protective equipment
(occupational footwear, protective gloves, safety goggles, etc.).
z
Prior to starting the work, secure the tractor against movement using manual brake.
Lubrication must be performed only when the engine is at standstill!
Front drive axle
Three-point linkage and rear semi-axes bearings
Front three-point hitch
Technical maintenance of the tractors after a general overhaul of the main groups
Run in the tractor after a general overhaul in accordance with the instructions for running in a new tractor.
Perform the maintenance in the same way as with a new tractor.
Position
number Name Number of
greasing
points
1 Pivot pins 4
2 Spigot shaft 2
3 Cardan shaft joint 2
8P
Number
of
position Name Number of
greasing
points
1 Rear semi-axes bearings 2
2 Lifting rod 2
3 Upper draw bar bracket 3
NM13N073
Pos.
no. Identification No. of
lubrication
points
1 Pins of cylinders of the front
three-point hitch 4
02F
TRACTOR MAINTENANCE
107