Zetor MAJOR HS, Operator'S Manual

Page: 23 / 140

Only release the overpressure plug when the coolant has cooled down! There is a danger of
scalding!
Hydrostatic steering
Air cleaner
Cab filtration
z
check the oil level in the gearbox housing
z
check tightness of screws and nuts of the control rods
and levers
z
check state of all hoses of hydraulic control circuits
whether they are not damaged and oil is not leaking
MHS16N045
If the air cleaner is heavily clogged with dirt, this condition
is indicated by a sensor that lights up an indicator on the
dashboard.
MHS16N051
Check and if necessary clean the air filters of the air
conditioning of the cabin (1) located in the rear overhang
of the roof and filter of the heating of the cabin (2) located
on the left side of the tractor before the cabin. Perform
partial regeneration by knocking or blowing with
compressed air. Regeneration of filters depends on
dustiness of the working environment. Perform cleaning or
replacement of filter elements after disassembly of the
cover grids.
MHS16N052
PREVENTIVE DAILY MAINTENANCE
22