Zetor MAJOR HS, Operator'S Manual

Page: 69 / 140

Engagement of rear PTO shaft - dependent revolutions
MHS16N113
At dependent revolutions of the rear PTO shaft, the number and sense of PTO shaft revolutions depends on
the shifted position of the reversing lever, shifted gear and group of gears shifted by the reduction lever.
1. Select the number of revolutions of the PTO shaft.
2. The lever for activation of the PTO shaft drive must be moved to the position (a).
3. Shift the suitable gear by the main gear shift, suitable group of gears by the reduction lever and the driving
direction by the reversion level.
4. When the tractor starts driving, the rear PTO shaft starts to rotate as well.
The clutch switch of the rear PTO shaft is not functional in this mode.
Press down the clutch pedal for short-term interruption of torque transmission from the engine.
Move the lever for activation of the PTO shaft drive to the position (n) or move the gear shift lever or road
and reduced speeds shifting lever to the neutral position (n) for longer interruption of torque transmission
from the engine.
The number of revolutions of the dependent PTO shaft see the Chapter Main technical parameters.
The clutch switch of the PTO shaft is not functional when the lever of switching of the PTO
shaft drive is in the position (a).
DRIVE OF AGRICULTURAL MACHINERY
68