Stopping the tractor - manual brake
Stopping the engine
When leaving the tractor, the disconnector of the battery must be in the off position.
Attention! When the engine is switched off, the engine control unit remains active for about
2 minutes because of storage of operation data. During this time the supply of current from the
accumulator must not be interrupted. Do not disconnect the accumulator before this time expires.
Under normal conditions the tractor must be stopped
slowly.
Shortly before stopping:
1. Push down the clutch pedal.
2. Move the main gear shift lever to the neutral position.
3. During each stop secure the tractor against
spontaneous movement using the hand brake.
MHS16N065
It is necessary to ensure that the engine cools down after
a work on the tractor with a full engine load.
1. Before stopping the engine decrease the engine speed
to 800 to 1,000 r.p.m. and keep it running idle for cca
5 minutes.
2. Move the manual fuel control handle to the position of
idling run.
3. The engine shall stop once you turn the key from the
position 'I' to the position '0'.
MHS16N066
DRIVING OPERATION
59
Summary of Contents for MAJOR HS
