Zetor CRYSTAL HD 150, Operator'S Manual

Page: 124 / 234

General principles of new tractor run-in in first 100 hours of operation
During first 100 hours of operation:
z
Load tractor in a normal way, avoid operation with low or maximum engine revolutions
z
Avoid operation under partial loading of the engine
z
Avoid excessive idle run operation
z
Check oil levels in engine often (during this time increased oil consumption is normal)
z
Check screw joints in particular in supporting parts of tractor
z
Learned insufficiencies to be removed immediately, you will thus prevent subsequent damage or
endangered operation
z
Keep the same procedure also after tractor complete overhaul
In first 10 hours of operation
From 100 hours of operation
After drive in completion you can work with tractor without limitations.
z
perform run-in in traffic
z
tighten fastening nuts of front and rear wheels
including connectionbead / rim with prescribed
torque
C18N089
RUNNING IN THE TRACTOR
123