Zetor CRYSTAL HD 150, Operator'S Manual

Page: 63 / 234

Zeroing (reset) of the indicator of service inspection intervals
C18N019
When the maintenance was performed, zero (reset) the indicator of service inspection
intervals.
Enter the service menu by pressing the button (B) for a longer time.
Use the (C) and (D) keys to select the settings item marked with the arrow (1). By pressing the button (B)
enter the menu
Use the (C) and (D) keys to select the service item marked with the arrow (2). By pressing the button (B)
enter the service menu
Long press the button (A) to reset the service interval indicator. At the position indicated by the arrow (3), the
symbol 500hrs will appear after the reset is complete.
Return to the home screen by pressing the (A) button.
Error signalling
Errors arising during tractor operation are indicated by
switching the corresponding signal lamp, acoustic signal
and error message in the instrument panel display.
If the error is indicated, the signal lamp still glows, even
though the display is switched to the next display.
If the error is not eliminated or the indicated state has not
returned to a normal state:
the corresponding signal lamp glows
when the tractor is switched off, the key in the switch box
is moved to position I and then the engine is started, the
corresponding signal lamp is switched on again and the
error message runs through the display.
1 - The signal lamp of a serious defect of the system (red).
2 - The signal lamp of a less serious defect of the system
(orange).
3 - Operational protection signal lamp (blue).
P18N048
INSTRUMENT PANEL
62