Zetor CRYSTAL HD 150, Operator'S Manual

Page: 39 / 234

Upper working lights switching on
C18N056
The upper working lights are switched on by pressing the bottom of the switches located on the panel on the
right pillar of the cab. Turning the lights on is indicated by the illuminated symbol on the switch.
A - front working lights
B - rear working lights
Control panel on the right rear mudguard
FHD18N012
Controls are located on the control panel on the right rear fender
1 - Hydraulic outlets control panel (more in the chapter HYDRAULIC EQUIPMENT)
2 - Manual throttle lever
3 - Joystick
4 - Engine revolutions preselection buttons (more in the chapter 'RUNNING OPERATION')
5 - Electrohydraulic control panel (more in the chapter ELECTROHYDRAULICS)
6 - Switches and controls
7 - Rear PTO preselction lever (more in the chapter AGRICULTURAL MACHINES DRIVE)
8 - Three-pin socket
9 - 12V / 10A mounting socket, not for lighter
10 - 7-pin socket
11 - Lighter
12 - Two-socket socket
ACQUAINTANCE WITH THE TRACTOR
38