Maintenance and treatment of tyres
FHD18N075
Regularly inspect the outer surface of the tire and verify that it has no defects in the lateral or overloaded
parts and damaged skeleton.
Tires that have defects have to be removed from further use.
Tire inflation
Basic values of recommended inflation are listed in the table. Check the pressure regularly before driving
when the tires are cold.
For inflating, use the air valve located on the rear of the tractor (A).
Remove the rubber cap indicated by the arrow (B) and instead screw on the tire inflation hose. Tighten the
hose to the end of the thread so that the check valve is depressed.
After inflating the tires and removing the tire inflation hose, it is necessary to replace the rubber cap.
Tractor shutdown and recommended points for tractor lifting
If the tractor is to be put out of operation for a shorter
period, inflate the tyres to the value required for road
transport. In case of a longer period of inactivity of the
tractor (storage), support the tractor and reduce the
pressure in the tyres to the minimum (the wheels must not
touch the ground).
E743
MAINTENANCE INSTRUCTIONS
212
Summary of Contents for CRYSTAL HD 150
