74
3. If necessary, re-position the template to align the big circle with the big cutout in the board.
247
4. Use the hammer and awl or nail to mark the locations of the four 7/32 holes near the edge of
the round cutout. Remove the template.
248
5. Use the drill and the 9/64 bit to drill the four holes in the corners of the board. If you have a
drill press, use it. Otherwise, take care to hold the drill as straight-up as you can. Hold the
baffle firmly down against a piece of plywood or a smooth work surface that you can drill into.
This will give you a cleaner hole on the bottom side of the board.
249
6. Change to a 7/32 bit and drill the four holes near the cutout.
250
247
248
249
250
Summary of Contents for THE PERCOLATOR
Page 83: ...83 That s it The baffle board is done Set it aside until the cabinet is complete 284 285 286...
Page 89: ...89...
Page 90: ......
