46
2. With the pencil, label the parts where it won’t show so you can easily fit them together again
later. Put the labels all towards the front.
122
122
3. With scissors or blade and ruler, cut out the templates provided with your kit.
123
Tape the
templates to the outside face of the various cabinet parts: the Top, Bottom, Front, one Side, and
the Upper and Lower Ports.
124
Don’t mess with the Cleats for now. In case the templates do not
match the wood size PERFECTLY (it happens), there’s a note on some of the templates showing
which edge of the wood to line it up with. If there is no note, the alignment is not super-critical;
just center the template.
123
124
4. With the awl, or a nail and small hammer, carefully poke a hole into the wood at the center of
each cross hair.
125
Save the Front for last. Mark the other parts first, then remove the template
from the first Side, tape it to the other Side, and mark those holes too.
126
Finally, now that you
are good at it, mark the Front as accurately as you can.
127
Remove all templates and tape. Keep
the templates handy for reference.
128
125
126
Summary of Contents for THE PERCOLATOR
Page 83: ...83 That s it The baffle board is done Set it aside until the cabinet is complete 284 285 286...
Page 89: ...89...
Page 90: ......
