27
c. Twist the green and black wires together, and twist the red and blue wires together, in the
same way as the power transformer wires.
66
Once again, be mindful not to over twist the
wires close to the coil.
4. Fins (Part # CH05) (2 pcs): These flank the tube socket and shield the tube from the magnetic
fields from the transformers. Place them as shown, careful that they face the right way. If you put
them in backwards, the tube won’t fit later. If the fins look like the letter L, then the base of the L
points towards the tube opening. Use four #10x3/8” sheet metal screws (Part # SC68) to attach
the fins.
67
DO NOT OVER-TIGHTEN THESE SCREWS! Just drive them in snug. If you over-tighten,
they will strip out the chassis.
64
65
66
67
Summary of Contents for THE PERCOLATOR
Page 83: ...83 That s it The baffle board is done Set it aside until the cabinet is complete 284 285 286...
Page 89: ...89...
Page 90: ......
