Verifying a Layer
Note
After a Custom Layer has be verified, events cannot be edited
To verify a layer:
In the Toolbar, open the Edit Menu and select Add/Remove Events.
Press the Verify Layer button in the middle of the window.
Enter your name in the Verified by window.
1.
2.
3.
Once the data within the Custom Layer has been reviewed for accuracy, it may be verified.
If an unverified layer is used to generate a report, a note will be displayed on the first page of the report stating
‘The report might not be suitable for making final diagnosis’.
Preparing a MATRx plus Patient Report
Warning
Patients fitted with an oral appliance after their MATRx plus Study, as prescribed by the interpreting physician, should be
monitored and undergo further sleep testing with their therapeutic appliance in place to ensure adequate treatment is
achieved.
Prior to preparing a study report, review the raw study data for data integrity and study abnormalities (see
Navigating
the Study
).
During a Baseline or OA Study, all respiratory events and study data will be recorded and scored automatically
using the MATRx plus algorithms. This information will be used to generate the reports.
To create a report:
In the Toolbar, open the Reports Menu.
Select the Report.
The first page of the Baseline and OA Study Reports display the patient’s demographic and medical information,
which is generated from the information entered in the Patient Information Portal.
1.
2.
54
