Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
42
“Left=Increase; Right=Decrease”.
Note
:
this parameter will remain hidden unless having selected “Every button
pair is configured separately” in Action of the pair buttons (see section
2.3.1).
Minimum Value
: sets which value from the available range will be the
minimum value permitted by the control. The available range is 0-100.
Maximum Value
: sets which value from the available range will be the
maximum value permitted by the control after. The available range is 0-100.
Increment on Short Press
: sets the increase or decrease to be applied to
the current value on every short press over the increase or decrease buttons,
respectively (i.e., the smaller the increment, the more presses will be
required). The available range is 0-100.
Increment on Long Press
: sets the increase or decrease to be applied to
the current value on every long press over the increase or decrease buttons,
respectively (i.e., the smaller the increment, the more presses will be
required). The available range is 0-100.
Link the control with a box in the display
: sets the area of the display
where to show the indicator of this control, i.e., the current numeric value.
The selected box must be configured with the same data type (see section
2.4 for details).
LED illumination control
: analogous to the homonymous parameter for the
previous functions (see above). In this case, the only options are “Regular”
and “Dedicated Object”.
The percentage values will be sent to the bus through object “
[Btn] [PX] Scaling
”.
