Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
44
Maximum Value
: sets which value from the available range will be the
maximum value permitted by the control.
Increment on Short Press
: sets the increase or decrease to be applied to
the current value on every short press over the increase or decrease buttons,
respectively (i.e., the smaller the increment, the more presses will be
required).
Increment on Long Press
: sets the increase or decrease to be applied to
the current value on every long press over the increase or decrease buttons,
respectively (i.e., the smaller the increment, the more presses will be
required).
Link the control with a box in the display
: sets the area of the display
where to show the indicator of this control, i.e., the current numeric value.
See section 2.4 for details.
LED illumination control
: analogous to the homonymous parameter for the
previous functions (see above). In this case, the only options are “Regular”
and “Dedicated Object”.
The counter values will be sent to the bus through object “
[Btn] [PX] Counter [size]
”.
Enumeration
# Enums
: number of states (up to 6) that will be distinguished. For every
distinguished state, one parameter named
Value j
will become available, in
order to set the value sent through the communication object.
Value j
: numerical value (0 – 255) that will be sent through the control object
when the user, after pressing the buttons, sets the control to state
j
. The
actual sending will not be performed until 1.5 seconds after the last press.
Link the control with a box in the display
: sets the area of the display
where to show the indicator of this control, i.e., the current numeric value.
See section 2.4 for details.
LED illumination control
: analogous to the homonymous parameter for the
previous functions (see above). In this case, the only options are “Regular”
and “Dedicated Object”.