Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
48
“Extended”: pressing on the two buttons will make Square TMD-Display
walk through the different HVAC modes and send a one-byte value to the
bus according to the selected mode. Which of the modes should be
available can be set through five specific checkboxes.
Figure 37
Pair Buttons – [Climate] Mode – Mode Type: Extended.
Link the control with a box in the display
: sets the area of the display
where to show the indicator of this control, i.e., the current numeric value.
The selected box must be configured with the same data type (see section
2.4 for details).
Note
:
this option is only available for Extended mode type.
LED illumination control
: sets the behaviour of the LEDs on the buttons.
The options are “Regular”, “State-dependent”, “State-dependent (both LEDs)”
and “Dedicated Object”.
The values will be sent to the bus through object “
[Btn] [PX] (Climate) Mode
”.
[Climate] Fan
Figure 38
Pair Buttons – [Climate] Fan.
