Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
47
Maximum Value
: sets which value from the available range (-671088.625 to
670760.9375; 30 by default) will be the maximum value permitted by the
control after.
Link the control with a box in the display
: sets the area of the display
where to show the indicator of this control, i.e., the current numeric value.
The selected box must be configured with the same data type (see section
2.4 for details).
LED illumination control
: analogous to the homonymous parameter for the
previous functions (see above). In this case, the only options are “Regular”
and “Dedicated Object”.
Figure 35
Pair Buttons – [Climate] Temperature setpoint.
The values are sent to the bus through “
[Btn] [PX] (Climate) Temperature Setpoint
”.
[Climate] Mode
Figure 36
Pair Buttons – [Climate] Mode.
Mode Type
: sets mode control type: “Heat/Cool” or “Extended” (HVAC).
“Heat/Cool”: pressing one of the two buttons will make Square TMD-
Display send a one-bit value to the bus (Left=Cool, value “0”; Right=Heat,
value “1”).
