Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
13
2.2.2
TEMPERATURE SENSOR
Square TMD-Display is equipped with
one internal temperature probe
which can
monitor the ambient temperature of the room, thus making the device capable of
reporting it to the KNX bus and of triggering certain actions when the temperature
reaches specific values.
Please refer to the specific manual “
Temperature Sensor in Square TMD-Display
”
(available at the Zennio homepage,
www.zennio.com
) for detailed information about
the functionality and the configuration of the related parameters.
2.2.3
SCREENSAVER
The screensaver is a special page that will only be shown after a period of inactivity,
configurable by parameter.
It is possible to configure the screensaver to only show the current
Time
, the current
Temperature
(selecting the desired measurement source: the internal temperature
sensor or an external value) or
both
(alternating every 5 seconds).
Notes
:
The temperature shown will be truncated to the range [-99ºC, 199ºC].
The time of day must be set through the bus by an external reference. In
addition, in the absence of power the clock will get outdated.
The screensaver will disappear when if any of the enabled buttons is touched. It can be
set by parameter whether, while the screensaver is active, this press should simply
cause the screensaver interruption or, moreover –apart from hiding the screensaver–,
the execution of the action corresponding to the pressed button.
ETS PARAMETERISATION
This screen is divided into three parts: Activation, Content and Exit, containing the
following parameters:
Activation timeout
: time to automatically show the screensaver after the last
button touch. Range: 1 – 255 seconds, minutes or hours.
