Z70 v2
54
•
[
No
/ Level 1 / Level 2
]: sets the level of security to access the configuration
page.
Time/Date
[
disabled/
enabled
]: if enabled, the date and time of the device can be set
directly from the user interface:
Figure 39.
Time and date.
Device
[
disabled/
enabled
]:
enables or disables the “Device” tab in the left menu. For
Profile
[
disabled/
enabled
]:
enables or disables the “Profile” tab in the left menu. For
more information, see section 2.2.1.2.2
Probe Calibration
[
disabled
/enabled
]: enables or disables the box to configure the offset
of the internal temperature probe.
Alarm Log
[
disabled
/enabled
]: enables or disables the alarm log box that provides
access to the log file where alarm events are incorporated, in reverse chronological
order, with the name, time and date of every alarm event will being shown. In addition,
the log will show the current status of each of them:
Alarm State
Icon
Alarm active
Alarm finished, but not confirmed
Alarm confirmed, but not finished
Alarm finished and confirmed
Table 2.
Alarm Log Icons