Z70 v2
25
Enabling and disabling of this function can only be done by parameter. If enabled, the volume
of the press and sending confirmation sounds will be possible to define.
ETS PARAMETERISATION
After enabling the “Custom” configuration of
Sounds
from “Configuration” screen (see section
¡Error! No se encuentra el origen de la referencia.
), a new tab will be incorporated into the
tree on the left.
Figure 13.
Sounds
The initial configuration of this screen is equivalent to the default option. However, the following
parameters will be configurable.
Disable User Sounds
[
disabled
/enabled
]: enables or disables acoustic signals when
actions derived from button presses are executed. If enabled, the following parameter
will be displayed:
➢
Default Volume (after Programming)
[
No Sound / 1 /
2
/ 3
]: volume at which press
and sending confirmation sounds will be emitted after ETS download.
Object for Doorbell
[
disabled
/enabled
]: enables or disables the doorbell function. If
enabled, a specific object (“
[General] Doorbell
”) will be included into the project
topology.
➢
Value
[
0 = No Action, 1 = Doorbell
/ 0 = Doorbell, 1 = No Action
]: parameter to
select which value should trigger which action when received through the indicated
object.
➢
Default Ringtone (after Programming)
[
Ringtone 1
/
… / Ringtone 7
]: desired
melody for doorbell after ETS download.
➢
Default Volume (after Programming)
[
No sound / 1 / 2 /
3
/ 4 / 5
]: volume of the
doorbell sound after ETS download.