Z70 v2
83
Button to Change between ºC and ºF
[
disabled
/enabled
]: enables a control that allows
the temperature scale to be changed from the box itself:
Include Plus Sign before Positive Numbers
[
disabled
/enabled
]: adds
the ‘+’ sign
before positive temperature values.
Indicator Type:
➢
[
Just Setpoint Temperature
]: only the setpoint temperature will be displayed.
➢
[
Setpoint is Main and Real is Secondary
]: this option shows two temperatures at
the same time. The real temperature will be displayed below the setpoint
temperature in a smaller font size and accompanied by a house icon.
➢
[
Setpoint is Secondary and Real is Main
]: this option shows two temperatures at
the same time. The setpoint temperature will be displayed below the real
temperature in a smaller font size and accompanied by a thermometer icon.
Figure 77.
Setpoint Temperature with different indicator types
Minimum Value
[
-
99…
10
…199
]: minimum value than can be reached by the control
after a number of presses on the bottom button.
Maximum Value
[
-
99…
30
…199
]: maximum value than can be reached by the control
after a number of presses on the top button.
Increment on Short Press
[
0.1…
0.5
…10
]: sets the increase or decrease step to be
applied to the current value on every short press over the top or bottom buttons,
respectively.
Increment on Long Press
[
0.1…
1
…10
]: sets the increase or decrease step to be
applied to the current value on every long press over the top or bottom buttons,
respectively.
Note:
Long and short increments are applied in ºC regardless of the scale used.
