Z70 v2
37
Figure 21.
Outdoor Unit n
Unit with Camera
[
disabled /
enabled
]: define whether the installed video intercom has
camera.
Outdoor Unit ID
[
ID_n
]: alphanumerical identifier of GetFace IP (field
Phone Number
(ID)
, in
Services
Phone
).
Note: the characters included in this field must comply RFC 2396 standard.
Set Static IP
[
disabled
/ enabled
]. If Z70 v2 and GetFace IP are in different networks,
IP
Address
[
192.168.1.201
] of GetFace IP must be set, in addition to
Specifying Gateway
,
in “IP Configuration” tab (see section 0).
Opening Settings
:
➢
HTTP Command Secure Opening
[
disabled
/enabled
]: the order to open a door
will be sent via a HTTP command. Setting a
username
and a
password
will be
required (must match with the ones set in GetFace IP in section
Services
HTTP
API
).
➢
KNX Object
[
disabled
/ enabled
]: enables the 1-bit object
“[VI n] Switch n”
by
means of which the output of a KNX actuator with the door lock connected to it can
be controlled. Choosing the
Object Value
[
1 = Open
/ 0 = Open
] that will open the
door is possible.
