Z70 v2
23
2.1.5
INTERNAL TEMPERTURE SENSOR
Z70 v2 is equipped with
an internal temperature sensor
for monitoring the ambient
temperature of the room, so that the device can report it to the KNX bus and trigger several
actions when the temperature reaches certain values.
Please refer to the specific documentation of the “
Temperature Probe
” available at the Zennio
homepage,
, for detailed information about the functionality and the
configuration of the related parameters.
2.1.6
AMBIENT LUMINOSITY SENSOR
Z70 v2 includes a sensor to measure the ambient luminosity level, so that the brightness of the
display can be adjusted according to the current luminosity of the room.
Please refer to the specific manual “
Luminosity and Proximity Sensor
” (available in the Z70
v2 product section at the Zennio homepage,
) for detailed information about
the functionality and the configuration of the related parameters.
2.1.7
TOUCH LOCKING
The touch panel of Z70 v2 can be optionally locked and unlocked anytime by writing a
configurable one-bit value to a specific object provided for this purpose. It can also be done
through scene values.
While locked an informative message will be shown. In addition, any user presses on the screen
will be ignored: no action associated with controls will be carried out.
Figure 11.
Touch Locked Message.
ETS PARAMETERISATION
After enabling
Touch Locking
from “Configuration” screen (see section
¡Error! No se
encuentra el origen de la referencia.
), a new tab will be incorporated into the tree on the left.
